0.025mm pi nikèl fil (NI200 NI201) UNS NO2201
Fil nikèl pi (NI200 NI201) UNS NO2201 0.025mm
| Klas nikèl | Ni+Ko | Cu | Si | Mn | C | Cr | S | Fe | Mg |
| ≥ | ≤ | ||||||||
| NI201 | Bal. | .25 | .3 | .35 | .02 | .2 | .01 | .3 | - |
| NI200 | Bal. | .25 | .3 | .35 | .15 | .2 | .01 | .3 | - |
Nikèl dezabiye
Karakteristik ak aplikasyon pou dezabiye nikèl
1) wo degre nan konduktiviti elektrik
2) ba rezistivite elektrik
3) ekselan sifas ak déchirure kondisyon kwen
4) Amelyore soudabilite kòm yon rezilta nan oksid sifas ki ba
5) ekselan formability ak karakteristik trase gwo twou san fon ak redwi mete mouri
6) Rezistans nan kwasans grenn jaden
7) pil rechargeable (nikèl metal hydride, ityòm ion), metal Stamping, 8) plon ankadreman, garnitur ak sele, aplikasyon pou ekleraj, aplikasyon pou superconductor
Nikèl dezabiye dimansyon tolerans
| Epesè (mm) | Epesè tolerans | Burr wotè | Lajè tolerans (mm) | |||||
| 2≤W <10 | 10≤w <50 | 50≤w <100 | 100≤w <150 | 150≤W <200 | 200≤w ≤ 500 | |||
| 0.02≤t <0.05 | +0.002, -0.003 | ≤0.005 | ± 0.05 | ± 0.10 | ± 0.15 | ± 0.20 | ± 0.30 | ± 0.50 |
| 0.05≤t <0.1 | ± 0.005 | ≤0.01 | ||||||
| 0.1≤t <0.2 | ± 0.008 | ≤0.015 | ||||||
| 0.2≤t <0.3 | ± 0.012 | ≤0.02 | ||||||
| 0.3≤t <0.4 | ± 0.015 | ≤0.03 | ± 0.10 | ± 0.15 | ± 0.25 | ± 0.50 | ± 0.80 | ± 1.00 |
| 0.4≤t <0.6 | ± 0.025 | ≤0.05 | ||||||
| 0.6≤t <0.8 | ± 0.030 | ≤0.06 | ± 0.30 | ± 0.40 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 |
| 0.8≤t <1.0 | ± 0.040 | |||||||
| 1.0≤t <1.2 | ± 0.050 | ≤0.08 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 | ± 1.00 | ± 1.50 |
| 1.2≤t <1.4 | ± 0.060 | |||||||
| 1.4≤t <1.7 | ± 0.070 | ≤0.10 | ||||||
| 1.7≤t <2.0 | ± 0.080 | |||||||
Aplikasyon nan fil nikèl
Aparèy Eectric ak machin chimik, baz fò nan filtre a, tiyo griy, eleman enteryè nan tiyo vakyòm, konpozan zantray tib yo elèktron, plon
Fil, sipòte fil, pwodiksyon batri, kouch vakyòm, kote lite elektwòd, ak echanjeur chalè
Shanghai Tankii Alloy Materyèl Co., Ltd se espesyalize nan pwodiksyon nan Ni-Cr alyaj, Cu-Ni alyaj, Fechral, Thermocouple Fil,pi nikèlak lòt materyèl alyaj presizyon nan fòm lan nan fil, teren, baton, ba ak plak.
Dimansyon ak tolerans (mm)
| Dyamèt | 0.025-0.03 | > 0.03-0.10 | > 0.10-0.40 | > 0.40-0.80 | > 0.80-1.20 | > 1.20-2.00 |
| Tolerans | ± 0.0025 | ± 0.005 | ± 0.006 | ± 0.013 | ± 0.02 | ± 0.03 |
