Fil nikèl pi (NI200 NI201) UNS NO2201 0.025mm
PiFil Nikèl(NI200 NI201) UNS NO2201 0.025mm
| Klas nikèl | Ni+Co | Cu | Si | Mn | C | Cr | S | Fe | Mg |
| ≥ | ≤ | ||||||||
| Ni201 | Bal. | .25 | .3 | .35 | .02 | .2 | .01 | .3 | - |
| Ni200 | Bal. | .25 | .3 | .35 | .15 | .2 | .01 | .3 | - |
Fil nikèl
Karakteristik ak aplikasyon fil Nikèl
1) Segondè konduktiviti elektrik
2) Ba rezistivite elektrik
3) Ekselan kondisyon sifas ak fant kwen
4) Amelyore soudabilite kòm yon rezilta nan oksid sifas ki ba
5) Ekselan fòmabilite ak karakteristik trase gwo twou san fon ak mete mouri redwi
6) Rezistans nan kwasans grenn
7) Batri Rechargeable (Nikèl Metal Hydride, Lityòm Ion), Stamping Metal, 8) Ankadreman Plon, Joint ak sele, Aplikasyon pou ekleraj, Aplikasyon Superconductor
Nikèl Strip Dimansyon Tolerans
| Epesè (mm) | Tolerans epesè | Burr wotè | Tolerans lajè (mm) | |||||
| 2≤w <10 | 10≤w <50 | 50≤w <100 | 100≤w <150 | 150≤w <200 | 200≤w ≤500 | |||
| 0.02≤t<0.05 | +0.002, -0.003 | ≤0.005 | ±0.05 | ± 0.10 | ±0.15 | ± 0.20 | ± 0.30 | ±0.50 |
| 0.05≤t<0.1 | ± 0.005 | ≤0.01 | ||||||
| 0.1≤t<0.2 | ± 0.008 | ≤0.015 | ||||||
| 0.2≤t<0.3 | ± 0.012 | ≤0.02 | ||||||
| 0.3≤t<0.4 | ± 0.015 | ≤0.03 | ± 0.10 | ±0.15 | ± 0.25 | ±0.50 | ±0.80 | ± 1.00 |
| 0.4≤t<0.6 | ± 0.025 | ≤0.05 | ||||||
| 0.6≤t<0.8 | ± 0.030 | ≤0.06 | ± 0.30 | ±0.40 | ±0.50 | ±0.50 | ±0.80 | ± 1.00 |
| 0.8≤t<1.0 | ± 0.040 | |||||||
| 1.0≤t<1.2 | ± 0.050 | ≤0.08 | ±0.50 | ±0.50 | ±0.80 | ± 1.00 | ± 1.00 | ± 1.50 |
| 1.2≤t<1.4 | ± 0.060 | |||||||
| 1.4≤t<1.7 | ± 0.070 | ≤0.10 | ||||||
| 1.7≤t<2.0 | ± 0.080 | |||||||
Aplikasyon fil Nikèl
Aparèy elektrik ak machin chimik, baz fò nan filtè a, kadriyaj tiyo, eleman enteryè nan tiyo vakyòm, konpozan andedan tib elèktron yo, plon.
fil, sipò fil, pwodiksyon batri, kouch vakyòm, elektwòd etensèl, ak echanjeur chalè
Shanghai Tankii Alloy Material co, Ltd espesyalize nan pwodiksyon Ni-Cr Alloy, Cu-Ni Alloy, Fechral, fil tèrmokapteur,pi nikèlak lòt materyèl alyaj presizyon nan fòm lan nan fil, teren, baton, ba ak plak.
Dimansyon ak tolerans (mm)
| Dyamèt | 0.025-0.03 | > 0.03-0.10 | > 0.10-0.40 | > 0.40-0.80 | > 0.80-1.20 | > 1.20-2.00 |
| Tolerans | ± 0.0025 | ± 0.005 | ± 0.006 | ± 0.013 | ± 0.02 | ± 0.03 |
